National Instruments PC-DIO-24/PnP - Manual (Page 66)

Appendix C Register-Level Programming
PC-DIO-24/PnP User Manual C-6 © National Instruments Corporation
Interrupt Control Register 1 (PnP Board Only)
Bit Name Description
2–7 x Reserved bit.
1 IRQ1 PPI Interrupt Request for Port B—If this bit and the
INTEN bit in Interrupt Control Register 2 are both set,
the PPI can send an interrupt, INTRB, to the host
computer. If this bit is cleared, the PPI does not send
the interrupt INTRB to the host computer, regardless
of the setting of INTEN.
0 IRQ0 PPI Interrupt Request for Port A—If this bit and the
INTEN bit in Interrupt Control Register 2 are both set,
the PPI can send an interrupt, INTRA, to the host
computer. If this bit is cleared, the PPI does not send
the interrupt INTRA to the host computer, regardless
of the setting of INTEN.
D7 D6 D5 D4 D3 D2 D1 D0
x x x x x x IRQ1 IRQ0