NetComm NB620W User Manual
Page 18
Advertising
NB620W Super-G Wireless Broadband Gateway User Guide
YML725 Rev1
18
www.netcomm.com.au
3. Make sure the box next to Internet Protocol (TCP/IP) is checked. Highlight Internet
Protocol (TCP/IP), and click the Properties button.
4. Select Obtain an IP address automatically. Once the new window appears, click the OK
button. Click the OK button again to complete the PC configuration.
After you have obtained an IP address, please access the Gateway by typing http://192.168.1.1
to configure the Gateway. (If you have changed the route's IP address, please type http://<the
new IP address of the gateway>.)
Advertising