NetComm NB620W - Manual (Page 23)

YML725 Rev1 NB620W Super-G Wireless Broadband Gateway User Guide
www.netcomm.com.au 23
Static IP Configuration
If you connect to the Internet using a permanent IP address, please select Static IP Configura-
tion from the pull down menu and fill the ISP specified values in the fields.
Note: If your ISP requires a PPPoE type connection, you should NOT use " Static IP
Config".
Host Name/Domain Name. Some ISPs require the host name and domain name as identifica-
tion. If it is not specified, assign on your own or leave it as blank.
IP Address. Enter the IP address of the gateway's Internet port. Please use the ISP specified
address.
Subnet mask. Enter the subnet mask supplied by your ISP.
Gateway. Your ISP will assign a gateway address for you. If you can not find one, please
contact your ISP.
Primary DNS. Enter the domain name server of the ISP.
Secondary DNS. The back up domain name server can be left blank if necessary.
MAC address. Some ISPs allow you to connect to them with a specified MAC address only.
You can enter the MAC address manually or copy it from a PC which is attached to the Local
Port. Simply type in its IP address and the gateway will copy the MAC address from that PC.
The gateway comes with the factory default MAC address. You do not need to change the
default value if the ISP is not checking the MAC address of your Internet Port.