4 connecting the netcomm super-g wireless gateway – NetComm NB620W User Manual
Page 8
NB620W Super-G Wireless Broadband Gateway User Guide
YML725 Rev1
8
www.netcomm.com.au
1.4 Connecting the NetComm Super-G Wireless Gateway
A typical Internet access application of the NB620W Gateway is shown below:
Connecting your Gateway
Site Selection
Before installation, select the Wireless Gateway location. Proper placement of the Gateway is
critical to ensure optimum radio range and performance. You can use the Site Survey Utility to
help you to determine the best location. Typically, the best location to place your Gateway is at
the center of your wireless coverage area. Try to place your mobile stations within the line of
sight. Obstructions may impede performance of the Gateway.
Connect the Ethernet Cables
WAN (Internet) Port
Connect to your broadband (Cable Modem or ADSL Modem) access equipment.
LAN (Local) Ports
Connect via ethernet cable to your local server or workstations (PCs).
Connect the USB printer and storage device
Connect the USB printer and USB storage device to the USB 2.0 host ports, power on the
printer and storage device. You can access them right after the Gateway starts up. Please note
that you can have one printer and one storage device at a time, two storage devices or two
printers will not work on this Gateway.