3 management, 1 management >> access log, 2 management >> factory reset – NetComm NB620W User Manual
Page 48
NB620W Super-G Wireless Broadband Gateway User Guide
YML725 Rev1
48
www.netcomm.com.au
3.3 Management
These management features are provided to allow you to effectively manage your gateway.
3.3.1 Management >> Access Log
The Access Log allows you to browse the gateway's traffic after a period of time and then log
the records to files for future reference. (Need access log software? Please look though
APPENDIX F SYSLOG SOFTWARE). Click the Refresh button to renew the list for the most
current records.
3.3.2 Management >> Factory Reset
Click the Reset button to set all configurations to factory default.
(Please push the reset button at the rear side of the gateway for 7 seconds to reset the gate-
way.)
The default values are:
User Name:
admin
Password:
admin
WAN/Internet Port:
DHCP client enabled
Local IP address:
192.168.1.1
Subnet mask:
255.255.255.0
DHCP server:
Enable
DHCP start address:
192.168.1.2
Number of DHCP clients:
128
Wireless:
Enabled
SSID:
NB620W
Channel:
11
Operation Mode:
802.11b/g mixed
WEP security:
No
Remote Management:
Disable
UPnP:
Disable