NetComm NB620W - Manual (Page 21)

YML725 Rev1 NB620W Super-G Wireless Broadband Gateway User Guide
www.netcomm.com.au 21
PPPoE Configuration
Most DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish an
Internet connection. If you are connected to the Internet through a DSL line, check with your
ISP to see what protocol they use.
Host Name/Domain Name. Some ISPs require the host name and domain name as identifica-
tion. If it is not specified, assign on your own or leave it as blank.
User Name, Password, Confirm Password. Enter your username, password and confirm
again in the fields for the login to the ISP.
Service Name. Enter the ISP specified service name or assign one of your own if the Service
Name is not specified.