6 advanced setup >> static routes – NetComm NB620W User Manual
Page 40
Advertising
NB620W Super-G Wireless Broadband Gateway User Guide
YML725 Rev1
40
www.netcomm.com.au
3.2.6 Advanced Setup >> Static Routes
When you have more than one network on your LAN, and you want to route certain IP
addresses of the network to another network, add them into the static routing table.
Destination Network / Host. The destination network is the address of the remote network or
host, which you want to assign a static route to.
Subnet Mask. The Subnet Mask determines which portion of a destination IP address is the
network portion, and which portion is the host portion.
Gateway. This is the IP address of the gateway device that allows for connection between the
Gateway and the remote network or host.
Advertising