N-Tron 9000 Series - Manual (Page 124)

5/17/2007 page 124 of 138
N-Ring get mode
Command Name n-ring get mode
Description To display the current N-Ring Mode.
Syntax n-ring get mode
Parameters None
Example N-TRON/Admin#[1]> n-ring get mode
N-Ring Mode : AutoMember
NOTES
N-Ring set mode
Command Name n-ring set mode
Description Sets the current N-Ring Mode, and ring ports if manager mode.
Syntax n-ring set mode <manager|automember|disable> [-rp <A|E>]
Parameters mode, and if mode=manager then –rp (ring ports)
Examples N-Ring Mode set to automember
................
................
.
Device is Going for Reboot....
N-TRON/Admin#[3]> n-ring set mode manager -rp A
N-Ring Mode set to manager
Port Set to be used is Slot A
................
................
.
Device is Going for Reboot....
NOTES NOTE: N-Ring Manager cannot have RSTP or Trunking enabled.