N-Tron 9000 Series - Manual (Page 96)

5/17/2007 page 96 of 138
Show all configuration parameters related to SNMP manager
Command Name system show snmpinfo
Description To show all the configuration parameters related to snmp manager
Syntax system show snmpinfo
Parameters None
Example N-TRON/Admin#[33]system/show> snmpinfo
System SNMP Configuration :
IP Address - Trap Station#1 : 192.168.1.2
IP Address - Trap Station#2 : Value Not Configured
IP Address - Trap Station#3 : Value Not Configured
IP Address - Trap Station#4 : Value Not Configured
IP Address - Trap Station#5 : Value Not Configured
SNMP Get Community Name : public
SNMP Set Community Name : private
SNMP Trap Community Name : public
Notes
System Restart
Command Name system restart
Description To restart (reboot) the device
Syntax system restart
Parameters None
Example N-TRON/Admin#[1]> system restart
Do you Want to Restart the System Now: [y/n]y
Do you Want to Save the Configuration: [y/n]y
................
................
Notes