N-Tron 9000 Series User Manual

Page 128

Advertising
background image

5/17/2007 page 128 of 138

Set RSTP Bridge Admin Status

Command Name

rstp set bridgeadminstatus

Description

Sets the Bridge Admin Status of the given Vlan-ID.

Syntax

rstp set bridgeadminstatus <vlan id > <bridge adminstatus >

Parameters

vlan id
Vlan Id for which the priority to be set.
bridge adminstatus
Status of the Bridge to be set.
Values of “fast”, “forcestp” and “disable” are valid

Examples

N-TRON/Admin#[1]> rstp set bridgeadminstatus 1 disable
N-TRON/Admin#[2]> rstp set bridgeadminstatus 2 fast

NOTES

Get RSTP Bridge Admin Status

Command Name

rstp get bridgeadminstatus

Description

Gets the Bridge Admin Status of the given Vlan-Id.

Syntax

rstp get bridgeadminstatus <vlan-id >

Parameters

vlan-id
Vlan Id for which the admin status is to be viewed .

Examples

N-TRON/Admin#[1]> rstp get bridgeadminstatus 1
N-TRON/Admin#[2]> rstp get bridgeadminstatus 2

NOTES


Set RSTP Bridge Forward Delay

Command Name

rstp set bridgeforwarddelay

Description

To set the forward delay time for a given Vlan-Id. Forward Delay in STP
is the time a switch waits after connecting to a root bridge, before he
changes the port state to forwarding from the listening and learning states.
RSTP only uses this as a backup feature for legacy STP device support.

Syntax

rstp set bridgeforwarddelay <vlan-id > <forwarddelay >

Parameters

vlan-id
Vlan Id for which the forward delay time to be set.
forwardelay

Forward delay Time to be set. The valid range of the Forward delay
time is (4.0 – 30.0) secs.

Examples

N-TRON/Admin#[1]> rstp set bridgeforwarddelay 1 6
N-TRON/Admin#[2]> rstp set bridgeforwarddelay 2 10

NOTES

Please ensure that the forwarddelay time and vlan id values are valid. STP
switches can take up to 2x this figure before both the root switch and the
STP switch changes the port modes into forwarding states.

Get RSTP Bridge Forward Delay

Command Name

rstp get bridgeforwarddelay

Description

To get the Forward Delay Time of a given Vlan Id.

Syntax

rstp get bridgeforwarddelay <vlan-id>

Parameters

vlan-id
Vlan Id for which the forward delay time is to be viewed.

Examples

N-TRON/Admin#[1]> rstp get bridge forwarddelay 1
N-TRON/Admin#[2]> rstp get bridge forwarddelay 2

NOTES

Please supply a valid Vlan Index ( being greater than zero)

Advertising