N-Tron 9000 Series - Manual (Page 46)

5/17/2007 page 46 of 138
RSTP – RSTP Configuration
The RSTP Configuration tab under the RSTP category will display the RSTP information for the
first VLAN. Using the pull down menu at the top of the page an administrator can choose which VLAN to
configure RSTP on. Once the VLAN is selected the administrator may configure the bridge by clicking on
the Configuration button in the middle of the page.
The configuration screen for the VLAN that was previously selected will look like the example
below. Here the administrator can make changes such as the Hello Time, the Forward Delay, the Max Age,
the priority, and the Status of RSTP on that VLAN. Following the link for the view RSTP Port
Configuration at VLAN# the administrator or user can see the current RSTP status of the ports on that
VLAN.
NOTES:
1. Trunking must be disabled in order to use RSTP.
2. N-Ring Manager cannot have RSTP enabled.
3. RSTP & N-Ring are different modes and cannot have redundant links along those lines.
See the examples on the following sheet.