NComputing PC Expanion L120 User Manual
Page 51
8-10
Click the <Connect> button.
4
When the Windows logon window
appears, type the user name and
the password.
5
Connecting with a switch (Supports 100Mbps switching)
‘Setup the IP address of the PC Expanion by referring to ‘2. Setting and
Confirming the IP Address of PC Expanion’. If you are using a switch,
you must set up the IP address manually because you cannot use an
automatically allocated IP address. For the correct IP address and
gateway address, ask your computer administrator.
1
Set the IP address of a host computer by referring to ‘3. Setting and
Confirming the IP Address of a Host Computer.’ If you are using a
switch, you have to setup the IP address manually because you
cannot use an automatically allocated IP address. For the IP address
and gateway address, ask your computer administrator. The IP
address of a host computer and PC Expanion must be in the same
sub-network. This means the first 3 among the 4 numbers of the IP
addresses must be the same. For example, if the IP address of a host
computer is 192.168.0.1, then the PC Expanion must have an IP
address starting with 192.168.0. If one of the first 3 numbers of IP
addresses is different, they are not in the same sub-network. To
connect to a computer not in the same sub-network, specify a host
computer and refer to ‘6. Connecting to a Specified Host Computer.’
2