NComputing PC Expanion L120 - Manual (Page 59)

8-18
In order to save the changed option, the PC Expanion must be restarted.
Click the <Yes> button in order to restart the PC Expanion. 6
If the PC Expanion is currently being connected and used, a warning
message appears. If you click the <Yes> button, the PC Expanion
restarts. However, since the current environment settings are
unchanged, you can use your environment settings when you
logon with the same user account after restarting.
Note
If the PC Expanion is turned off or does not exist in the same sub-
network, the following screen appears and the settings will not be
changed. In this case, click the <OK> button to cancel the changes.
When the PC Expanion is rebooted, the PC Expanion attempts to
connect to the specific host PC after a few seconds. If the PC Expanion is
connected to the host PC, please check the IP address of the specific
host PC in the setup. 7
PC Expanion users can log in from the host PC. <Start> <All
Programs> <NCT-2000-XP> Select <NCT-2000-XP Console>
in order to run the NCT-2000-XP program. Go to <Hardware
Settings (Local/LAN)>
Select <UTMA/UTSA Device> and then
select the specific PC Expanion. Then double-click it.
1
8. How to log in automatically when the PC
Expanion connects to the host PC.
Click the <Connection Settings> icon
in the ‘UTMA/UTSA Setup view’. 2