NComputing PC Expanion L120 - Manual (Page 66)

8-25
Set the time. Then click <OK>
button or <Apply> button. The
range of timing is from 1 until
999 seconds. 2
When a host computer is shutdown or restarted, and if a PC
Expanion user selects the <Cancel> button, the host computer will
not be shutdown. A the message will appear saying that a station
user canceled the shutdown.
Note
Please refer to ‘9. How to send a message to the connected PC Expanion’ in
Part 8.
16. How to enable or disable the function of
sending a message
Go to <Start> <All Programs>
<NCT-2000-XP> <NCT-2000
-XP Console>. Go to <Software
Settings (local)>
<Information
and Settings> Select <System
Settings> and then double-click
the ‘Disable Send Broadcast
Message ’ option on the right.
1
To use the Transmit Message function, select ‘Users can transmit a
notification message.’ In order not to use the Transmit Message
function, select ‘Users cannot transmit a notification message’. Click the
<OK> or <Apply> button to apply the settings. This setting does not
control the NCT-2000-XP console function, but rather the Transmit
Message function that is available when you click the NCT-2000-XP
shortcut icon on the Desktop notification area. 2