NComputing PC Expanion L120 - Manual (Page 70)

8-29
Be sure to set your password to prevent anyone other than an
administrator from changing the NCT-2000-XP console settings.
You can set a password when you install the NCT-2000-XP application.
To set a password when you install the program, enter a password in
the ‘New Password” and ‘Confirm Password’ and click the <Next>
button instead of selecting ‘Do not set administrator password.’
21. How to set the password of the NCT-2000-
XP program
Go to <Start> <All Programs> <NCT-2000-XP> <NCT-2000-
XP Console>. Go to <Software Settings (local)> <Information &
Settings> Select <System Settings> and then double-click the
‘Administrator Password’ option on the right.
1
If ‘Disable password protection’ is
checked, uncheck the option. Type
new password in the ‘Password’
and ‘Retype Password’ column.
Then click the <Change Password>
button. Click the <OK> button or
<Apply> button. 2
A user can set a USB storage device connected to a host computer so that
a specific PC Expanion can access it. The L200 model provides a USB port
so that a USB device can be connected to it directly. A USB storage device
directly connected to the L200 is not accessible by a user using another
PC Expanion. Only a user using the L200 can access a USB storage device
directly connected.
* The USB port on the L200 model does not
support the USB device or USB storage device
or USB printer under Linux.
22. How to use the USB port in case of L2XX model
series