1 introduction and preparation, Hardware notice, Introduction – Nortel Networks Nortel Business Services Gateway BSGX4e User Manual
Page 6: Hardware notice introduction, Ntroduction, Preparation
1 Introduction and preparation
This Initial Setup Guide provides explanations and instruction details for using the
Initial Setup Wizard in the BSGX4e. The Initial Setup Wizard guides you through a series
of steps that configure the basic functions of the BSGX4e so that it is ready for
The comprehensive configuration tool for the BSGX4e is the Web User Interface (Web
UI). To access the Initial Setup Wizard you logon to the Web UI. The Web UI is highly
detailed and is designed for technicians and engineers. The Initial Setup Wizard
performs a simplified configuration process using the most common configuration
This document applies to the BSGX4e model in a home or small office environment and
assumes you are connecting primarily SIP phones (for VoIP service) and PCs to your
The BSGX4e has an Ethernet interface for connecting to the Internet. This interface is
suitable for connecting to Digital Subscriber Line (DSL) and Cable modems.
The BSGX4e is a stand-alone box designed to sit on a desktop.
The following BSGX4e models are also available.
: Before working on this equipment, be aware of good safety practices
and the hazards involved with electrical circuits.
: To reduce risk of injury, fire hazard, and electric shock, do not install
the unit near a damp location.
: Do not connect the PHONE port to the central office line.
: To reduce the risk of fire, use only number 26 AWG or larger UL Listed
or CSA Certified telecommunication line cord for all network and