Ricoh Aficio MP 9000 - Manual (Page 10)

2
About the Scanner Functions
This section describes functions you can use in the scanner mode.
For details about each function, see respective chapters.
❖ Sending scanned files
There are several methods you can use to send captured data as files to com-
puters.
• Sending scan files by e-mail
For details, see chapter 1 "Sending Scan Files by E-mail".
• Sending scan files to a shared folder
For details, see chapter 2 "Sending Scan Files to Folders".
• Sending scan files to an FTP server
For details, see chapter 2 "Sending Scan Files to Folders".
• Sending scan files to a NetWare server
For details, see chapter 2 "Sending Scan Files to Folders".
• Delivering scan files using the delivery server
For details, see chapter 4 "Delivering Scan Files".
❖ Scanning originals using the TWAIN driver
Use the TWAIN driver to specify the machine where originals will be scanned
from a client computer. For details, see chapter 5 "Scanning Originals with the
Network TWAIN Scanner".
❖ Storing files
You can store scan files on the machine's hard disc. Stored files can be sent lat-
er. For details, see chapter 3, "Storing Files Using the Scanner Function".
Note
❒ When the Copy Data Security Unit is installed, if you scan an original that
was printed using the data security for copying function, the machine beeps
and an entirely gray page is sent or stored. You can use the log file to check
who scanned the confidential original. For details about the data security for
copying function, consult the administrator.
Reference
p.11 “Sending Scan Files by E-mail”
p.37 “Sending Scan Files to Folders”
p.81 “Delivering Scan Files”
p.99 “Scanning Originals with the Network TWAIN Scanner”
p.61 “Storing Files Using the Scanner Function”