Ricoh Aficio MP 9000 User Manual
Page 134
Various Scan Settings
126
6
G
After all originals are scanned, press {q}.
Storing or transmission starts.
Note
❒ If [Batch] is selected, originals can be scanned using the ADF.
❒ When scanning originals using the exposure glass, depending on the set-
tings for [Wait Time for Next Orig.: Exposure Glass] under [Scanner Features], the
machine can wait for additional originals even if [Batch] is not selected in
[Original Feed Type]
. For details about [Wait Time for Next Orig.: Exposure Glass],
see General Settings Guide.
❒ If, under [Scanner Features], [Set Wait Time] is set for [Wait Time for Next Orig.:
Exposure Glass]
or [Wait Time for Next Original(s): SADF], place additional orig-
inals within the specified time. When the countdown ends, transmission or
storage starts automatically. To start transmission or storage before the
countdown is completed, press {q}. Countdown is canceled if Scan Set-
tings or other settings are changed in the meantime. Place additional orig-
inals, and then press {Start}. The machine scans the originals and the
countdown is resumed. For details about [Wait Time for Next Orig.: Exposure
Glass]
and [Wait Time for Next Original(s): SADF], see General Settings Guide.
❒ If [SADF] is selected, scanning from the exposure glass is enabled after
scanning from the ADF. If this happens, you must press {Start} to start
scanning.
❒ To switch the scanning setting for additional originals to [1 Sided Original]
after scanning one side of the last page of a batch of two-sided originals,
press [Change Setting], and then press [1 Sided Original].