Ip-fax settings, 4ip-fax settings – Ricoh Aficio ISC 615G User Manual
Page 100
Fax Features
92
4
IP-Fax Settings
This section describes the user tools in the IP-Fax Settings menu under Fax Fea-
tures.
Make settings to use IP-Fax.
Set H.323 for the gatekeeper, SIP for SIP server, and gateway to sent to G3 fax if
necessary. Check the settings of the network to which this machine is connected
before making settings.
Make sure you enter these characters correctly:
• Numbers
• Symbols (# and *)
The following characters can be used for registration of the SIP
User Name in SIP Settings. Make sure you enter these characters correctly:
• Alphanumeric symbols (lower and upper cases)
• The 21 symbols in the following table.
Use numbers and periods (“.”) to enter the correct IPv4 addresses for the gate-
keeper, SIP server, and gateway. To obtain the correct IP addresses, consult ad-
ministrator.
❖ Enable H.323
Specify whether or not H.323 is used for IP-Fax transmission.
• On
• Off
❖ Enable SIP
Specify whether or not SIP is used for IP-Fax transmission.
• On
• Off
;
?
:
&
=
+
$
,
-
_
;
!
~
*
#
@
(
)
%
/