Ricoh Aficio ISC 615G - Manual (Page 28)

Connecting the Machine
20
1
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive] .
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒ [SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3/IMAP4 Settings].
❒ When [SMTP Authentication] is set to [On], also make setting for [Key Operator's
E-mail Add.] .
❒ [E-mail Communication Port] and [Fax E-mail Account] must be specified in order
to use the reception function.
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port] .
Reference
p.54 “Interface Settings”
p.63 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using Internet FAX with IEEE 1394 in-
terface cable.
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.
Menu User Tool Setting Requirements
Interface Setting/IEEE 1394 IPv4 Address Necessary
Interface Setting/IEEE 1394 DDNS Configuration As required
Interface Setting/IEEE 1394 Host Name As required
Interface Setting/IEEE 1394 Domain Name As required
Interface Setting/IEEE 1394 WINS Configuration As required
Interface Setting/IEEE 1394 IPv4 over 1394 Necessary
Interface Setting/Network IPv4 Gateway Address Necessary
Interface Setting/Network DNS Configuration As required
Interface Setting/Network Effective Protocol Necessary
File Transfer SMTP Server Necessary
File Transfer SMTP Authentication As required
File Transfer POP before SMTP As required
File Transfer Reception Protocol As required