Ieee 802.11b (wireless lan) – Ricoh Aficio ISC 615G User Manual
Page 33
Network Settings
25
1
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive]
.
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3/IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port]
.
Reference
p.54 “Interface Settings”
p.63 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending e-mail with IEEE 802.11b
(wireless LAN).
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.
Menu
User Tool
Setting Requirements
Interface Setting/Network Machine IPv4 Address
Necessary
Interface Setting/Network IPv4 Gateway Address
Necessary
Interface Setting/Network DNS Configuration
As required
Interface Setting/Network DDNS Configuration
As required
Interface Setting/Network Domain
As required
Interface Setting/Network WINS Configuration
As required
Interface Setting/Network Effective Protocol
Necessary
Interface Setting/Network LAN Type
Necessary
Interface Setting/Network Permit SNMPv3 Communictn.
As required
Interface Setting/Network Permit SSL/TLS Comm.
As required
Interface Setting/Network Host Name
As required
Interface Setting/IEEE 802.11b Communication Mode
Necessary
Interface Setting/IEEE 802.11b SDID Setting
As required
Interface Setting/IEEE 802.11b Channel
As required
Interface Setting/IEEE 802.11b Security Type
As required
Interface Setting/IEEE 802.11b Communication Speed
As required
File Transfer Setting
SMTP Server
Necessary
File Transfer Setting
SMTP Authentication
As required
File Transfer Setting
POP before SMTP
As required