Ricoh Aficio ISC 615G - Manual (Page 29)

Network Settings
21
1
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive] .
❒ [SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3/IMAP4 Settings].
❒ When [SMTP Authentication] is set to [On], also make setting for [Key Operator's
E-mail Add.] .
❒ [E-mail Communication Port] and [Fax E-mail Account] must be specified in order
to use the reception function.
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port] .
Reference
p.54 “Interface Settings”
p.63 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for using Internet FAX with IEEE 802.11b
(wireless LAN).
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.
File Transfer POP3/IMAP4 Settings As required
File Transfer Key Operator's E-mail Add. As required
File Transfer E-mail Communication Port Necessary
File Transfer E-mail Recept. Interval As required
File Transfer Max. Recept. E-mail Size As required
File Transfer E-mail Storage in Server As required
File Transfer Fax E-mail Account Necessary
Menu User Tool Setting Requirements
Interface Setting/Network Machine IPv4 Address Necessary
Interface Setting/Network IPv4 Gateway Address Necessary
Interface Setting/Network DNS Configuration As required
Interface Setting/Network DDNS Configuration As required
Interface Setting/Network Domain As required
Interface Setting/Network WINS Configuration As required
Menu User Tool Setting Requirements