Ieee 1394 (ipv4 over 1394) – Ricoh Aficio ISC 615G User Manual
Page 35
Network Settings
27
1
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effective].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.54 “Interface Settings”
p.63 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending file with IEEE 1394 interface
cable.
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effective].
Interface Setting/Network Permit SNMPv3 Communictn.
As required
Interface Setting/Network Permit SSL/TLS Comm.
As required
Interface Setting/Network Host Name
As required
File Transfer Setting
Default User Name/PW(Send)
As required
File Transfer Setting
Scanner Resend Time
As required
File Transfer Setting
Scanner Resend Setting
As required
Menu
User Tool
Setting Requirements
Interface Setting/IEEE 1394 IPv4 Address
Necessary
Interface Setting/IEEE 1394 DDNS Configuration
As required
Interface Setting/IEEE 1394 Host Name
As required
Interface Setting/IEEE 1394 Domain Name
As required
Interface Setting/IEEE 1394 WINS Configuration
As required
Interface Setting/IEEE 1394 IPv4 over 1394
Necessary
Interface Setting/Network IPv4 Gateway Address
Necessary
Interface Setting/Network DNS Configuration
As required
Interface Setting/Network Effective Protocol
Necessary
File Transfer Setting
Default User Name/PW(Send)
As required
File Transfer Setting
Scanner Resend Time
As required
File Transfer Setting
Scanner Resend Setting
As required
Menu
User Tool
Setting Requirements