Ricoh Aficio ISC 615G - Manual (Page 62)

System Settings
54
2
Interface Settings
This section describes the user tools in the Interface Settings menu under System
Settings.
Network
This section describes the user tools in the Network menu under Interface Set-
tings.
❖ Machine IPv4 Address
Before using this machine in the network environment, you must specify the
IPv4 address and subnet mask.
When you select [Specify], enter the [IPv4 Address:] and [Sub-net Mask:] as
“xxx.xxx.xxx.xxx”(“x” indicates a number).
If the IEEE 1394 interface board is installed, and you are using the IEEE 1394
interface, you must set the address of the domain, different from the IPv4 Ad-
dress:
of IEEE 1394. If you to set the address for the same domain, set a dif-
ferent value for the Sub-net Mask:.
When you select [Specify], make sure that [IPv4 Address:] is difference from
that of another machines on the network.
The physical address (MAC address) also appears.
If you use Ethernet and IEEE 1394 (IP over 1394) interfaces at the same time,
settings must be made carefully.
• Auto-Obtain (DHCP)
• Specify
• IPv4 Address: 011.022.033.044
• Sub-net Mask: 000.000.000.000
❖ IPv4 Gateway Address
A gateway is a connection or interchange point between two networks.
Specify the gateway address for the router or host computer used as a gate-
way.
• IPv4 Gateway Address: 000.000.000.000
❖ Machine IPv6 Address
Specify the machine's IPv6 network address.
• Link-local Address
The machine's specified link-local address appears.
• Manual Config. Address
The machine's manually configuration address appears.
• Stateless address: 1-5
The specified stateless address appears.
❖ IPv6 Gateway Address
Displays the machine's IPv6 gateway address appears.