Settings required to use e-mail function, Ethernet – Ricoh Aficio ISC 615G User Manual
Page 31
Network Settings
23
1
Reference
p.54 “Interface Settings”
p.63 “File Transfer”
Settings Required to Use E-mail Function
This section lists the settings required for sending e-mail.
Ethernet
This section lists the settings required for sending e-mail with Ethernet cable.
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.
Menu
User Tool
Setting Requirements
Interface Setting/Network Machine IPv4 Address
Necessary
Interface Setting/Network IPv4 Gateway Address
Necessary
Interface Setting/Network DNS Configuration
As required
Interface Setting/Network DDNS Configuration
As required
Interface Setting/Network Domain
As required
Interface Setting/Network WINS Configuration
As required
Interface Setting/Network Effective Protocol
Necessary
Interface Setting/Network Ethernet Speed
As required
Interface Setting/Network LAN Type
Necessary
Interface Setting/Network Permit SNMPv3 Communictn.
As required
Interface Setting/Network Host Name
As required
File Transfer
SMTP Server
Necessary
File Transfer
SMTP Authentication
As required
File Transfer
POP before SMTP
As required
File Transfer
Reception Protocol
As required
File Transfer
POP3/IMAP4 Settings
As required
File Transfer
Key Operator's E-mail Add.
As required
File Transfer
E-mail Communication Port
As required
File Transfer
Scanner Resend Time
As required
File Transfer
Scanner Resend Setting
As required