Raritan Computer DOMINION KX II DKX2-0E-E - Manual (Page 121)

Chapter 8: User Management
107
This feature limits access to the Dominion KX II device by users in the
selected group to specific IP addresses. This feature applies only to users
belonging to a specific group, unlike the IP Access Control List feature
which applies to all access attempts to the device, is processed first, and
takes priority. Refer to IP Access Control (on page 153) for more
information.
Important: IP Address 127.0.0.1 is used by the Dominion KX II Local
Port. When creating an Access Control List, if 127.0.0.1 is within the
range of IP Addresses that are blocked, then you will not have access
to the Dominion KX II local port.
Use the IP ACL section of the Group page to add, insert, replace, and
delete IP access control rules on a group-level basis.
Figure 44: Group-based IP Access Control List
¾ To add (append) rules:
1. Type the starting IP Address in the Starting IP field.
2. Type the ending IP Address in the Ending IP field.
3. Select the Action from the available options:
ƒ Accept. IP Addresses specifying accept are allowed access to the
Dominion KX II device.
ƒ Drop. IP Addresses specifying drop are denied access to the
Dominion KX II device.
4. Click Append. The rule is added to the bottom of the rules list.
5. Repeat steps 1 through 4 for each rule you want to enter.
¾ To insert a rule:
1. Type a Rule #. A Rule # is required when using the Insert command.
2. Populate the Starting IP and Ending IP fields.
3. Select the Action from the drop-down list.
4. Click Insert. If the Rule # you just typed equals an existing Rule #, the
new rule is placed ahead of the exiting rule and all rules are moved
down in the list.