Raritan Computer DOMINION KX II DKX2-0E-E User Manual
Page 168
IP Access Control
154
¾
To use IP Access Control:
1. Open the IP Access Control page using one of these methods:
Select Security > IP Access Control, or
Click the Set System ACL button from the Network Settings (on
page 122) page
The IP Access Control page opens:
Figure 70: IP Access Control
2. Check the Enable IP Access Control checkbox to enable IP access
control and the remaining fields on the page.
3. Select the Default Policy. This is the action taken for IP addresses
that are not within the ranges you specify.
Accept. IP Addresses are allowed access to the Dominion KX II
device.
Drop. IP Addresses are denied access to the Dominion KX II
device.
¾
To add (append) rules:
1. Type the IP Address and subnet mask in the IP/Mask field.
2. Select the Policy from the drop-down list.
3. Click Append. The rule is added to the bottom of the rules list.