Raritan Computer DOMINION KX II DKX2-0E-E - Manual (Page 158)

Power Control
144
¾ To make power associations (associate power strip
outlets to target servers):
Note: When a power strip is associated to a target server (port), the outlet name
is replaced by the target server name (even if you assigned another name to the
outlet).
1. Select the power strip from the Power Strip Name drop-down list.
2. For that power strip, select the outlet from the Outlet Name drop-
down list.
3. Repeat steps 1 and 2 for all desired power associations.
4. Click OK. A confirmation message is displayed.
¾ To change the port name:
1. Type something descriptive in the Name field. For example, the
name of the target server would be a likely candidate. The name can
be up to 32 alphanumeric characters and can include special
characters (see "Valid Special Characters" on page 32).
2. Click OK.
¾
To cancel without saving changes:
Click the Cancel button.
¾ To remove a power strip association:
1. Select the appropriate power strip from the Power Strip Name drop-
down list.
2. For that power strip, select the appropriate outlet from the Outlet
Name drop-down list.
3. From the Outlet Name drop-down list, select None.
4. Click OK. That power strip/outlet association is removed. A
confirmation message is displayed.