Raritan Computer DOMINION KX II DKX2-0E-E - Manual (Page 34)

Step 1: Configure Target Servers
20
a. Select Main Menu > System Settings > Display. The Display
Settings dialog opens.
b. From the Display tab, select a Resolution supported by
Dominion KX II.
c. From the Advanced tab, verify that the Refresh Rate is
supported by Dominion KX II.
Note: Once connected to the target server, in many Linux graphical
environments, the <CTRL> <ALT> <+> command will change the video
resolution, scrolling through all available resolutions that remain enabled in the
XF86Config file.
¾ To configure target servers running Linux (command
line):
1. Set the mouse acceleration to exactly 1 and set the threshold to
exactly 1. Enter this command: xset mouse 1 1. This should be set for
execution upon login.
2. Ensure that each target server running Linux is using a resolution
supported by Dominion KX II at a standard VESA resolution and
refresh rate.
3. Each Linux target server should also be set so the blanking times are
within +/- 40% of VESA standard values:
ƒ Go to the Xfree86 Configuration file XF86Config
ƒ Using a text editor, disable all non-Dominion KX II supported
resolutions
ƒ Disable the virtual desktop feature (not supported by Dominion
KX II)
ƒ Check blanking times (+/- 40% of VESA standard)
ƒ Restart computer