Raritan Computer DOMINION KX II DKX2-0E-E User Manual
Page 198
Local Port Administration
184
1280x1024
7. Select the Refresh Rate from the drop-down list:
60 Hz
75 Hz
8. Select the type of Local User Authentication:
Local/LDAP/RADIUS. This is the recommended option; for more
information about authentication, refer to Remote
Authentication (on page 36) and Authentication vs.
Authorization (on page 37).
None. There is no authentication for local console access. This
option is recommended for secure environments only.
9. Check the Ignore CC managed mode on local port checkbox if you
would like local user access to the Dominion KX II even when the
device is under CC-SG management.
Note: If you clear this checkbox but then want local port access, you
will have to remove the device from under CC-SG management
(from within CC-SG) and then you will be able to check this
checkbox.
10. Click OK.
¾
To close the page without saving any changes:
Click Cancel.
¾
To reset back to defaults:
Click Reset to Defaults.