Raymarine C Series - Manual (Page 100)

86 C-Series Display Reference Manual
In the following example the motion mode has been set to Relative with a vessel offset
of 1/3. The boat is fixed in the offset position and the chart moves accordingly:
True motion (TM)
When the motion mode is set to True, the chart is fixed and the boat moves in true
perspective to fixed landmasses on the screen. As the boat’s position approaches the
edge of the screen, the chart picture is automatically reset to reveal the area ahead of
the boat.
Note: It is not possible to select True Motion when the orientation is set to Head Up.
Autorange
Autorange selects and maintains the largest possible scale of chart that will display
both the boat and the target waypoint. Autorange is not available if radar-chart
synchronization is on.
4.18 Altering the level of chart detail displayed
The chart features that you need to see will vary according to your particular needs and
circumstances. You can adjust this level of detail by showing/ hiding the following
features:
• Waypoints.
• Waypoint index of a route.
• Individual routes and tracks.
• Cartographic features.
• Chart vectors for COG, heading, tide and wind (see
page 74 )
Note: You can also specify the level of detail on the chart display (simple, detailed or
extra detailed). For more details, see page 93.
D6840_2
D6841-2
81221_4.book Page 86 Tuesday, February 28, 2006 5:24 PM