Inserting a card, Removing a card, With the unit powered on – Raymarine C Series User Manual

Page 32: Important information, At the beginning of this manual, Select the cf card removal function

Advertising
background image

18

C-Series Display Reference Manual

Inserting a card

To insert a card, refer to the illustration and:
1. Check that you are using the correct type of card (see

Important Information

, at the

beginning of this manual

).

2. Open the chart card door, located on the front left of the display.
3. Insert the card as shown, with the lip of the card facing inwards. It should position

easily. If it does not, DO NOT force it, check the direction in which the lip is facing.

4. Gently press the card home.
5. To prevent the ingress of water and consequent damage, close the chart card door

and press firmly until a click is heard.

Removing a card

...with the unit powered on

1. Select the CF Card Removal function:

IMPORTANT:
If you try to remove a card without accessing the setup menu, a blue screen and
warning message is displayed and the unit must be restarted.
You must only remove the card while the CF Card Removal message is displayed.
Once the message is closed, the card should no longer be removed.

2. Open the chart card door.

D7215_2

Narrow

Groove

Lip

Setup

System Diagnostics...
Remove CF Card

D8518-1

Highlight
Remove CF Card

Select Remove
CF Card

MENU

CF Card Removal

You may now safely remove your

compact flash card.

Press OK or CANCEL when finished.

81221_4.book Page 18 Tuesday, February 28, 2006 5:24 PM

Advertising