Raymarine C Series - Manual (Page 3)

Important information i
Important Information
Intended use
The display units detailed in this handbook may form part of marine navigational radar
system or GPS system intended for use on (non-IMO/SOLAS class) leisure vessels or
small workboats.
This handbook contains important information on the operation and maintenance of
your C-Series Display. To get the best results in operation and performance, please take
the time to read this handbook thoroughly.
For full details of installation and system integration, please refer to the C-Series
Installation Guide supplied with the display.
Safety notices
WARNING:Navigation Aid
This device is intended to be used as an aid to navigation. Its
accuracy can be affected by many factors, including equipment
failure or defects, environmental conditions and incorrect
handling or use. It is the user’s responsibility to exercise common
prudence and navigational judgement. This device should not be
relied upon as a substitute for such prudence and judgement.
WARNING:Product installation
This equipment must be installed in accordance with the
instructions in the C-Series System Installation Guide. Failure to do
so could result in poor product performance, personal injury and/
or damage to the vessel.
WARNING:High voltage
The display unit and scanner unit contain high voltages.
Adjustments require specialized service procedures and tools only
available to qualified service technicians - there are no user
serviceable parts or adjustments. The operator should never
remove the display unit cover or attempt to service the
equipment.
WARNING:Electromagnetic energy
The radar scanner transmits electromagnetic energy. Ensure that
the scanner has been installed according to the recommendations
given in the relevant scanner handbook. Avoid looking directly at
the antenna.
81221_4.book Page i Tuesday, February 28, 2006 5:24 PM