Raymarine C Series - Manual (Page 193)

Chapter 12: System setup and customizing 179
12.2 Changing the databar
You can change the data bar to meet your own particular needs. This includes:
• Position - top or side.
• Size (top position only).
• Data displayed.
Note:
The databar configuration is a local setting and will therefore only affect the in-
dividual display on which you are working.
Databar position
The data bar can either be displayed vertically at the right-hand side of your screen or
horizontally across the top:
To change the data bar position:
Data bar size
When the data bar is positioned at the top of your screen, you have the option of
displaying the bar in either a Large or Normal format. The large bar provides more
data:
D8273_1
Top data bar Side data bar
D8272_1
Highlight Position
Select Position
DATA
Databar Setup Menu
Large
Configure...
Position Top
Press and hold
Side
Top
Select
OK
Save
DATABAR
ON OFF
Highlight Data-
bar Setup
Select Data-
bar Setup
MENU
Or
Setup
System Setup...
Alarm Setup
Display Setup....
Databar Setup...
Select Page Set...
81221_4.book Page 179 Tuesday, February 28, 2006 5:24 PM