Raymarine C Series - Manual (Page 76)

62 C-Series Display Reference Manual
2. Select and insert the first waypoint in the new route:
3. Continue entering waypoints until your route is complete.
Note:
If you make an error, you can delete the waypoint from the new route list (for
details see page 63).
Building a route on-screen and via the waypoint list
You can build your route using both the on-screen and the waypoint list methods
described on the previous pages. This will necessitate alternating control between the
Make Route dialog and the chart.
Changing control
Making changes to the route being built
If you make an error whilst building a route you can:
• Undo the last waypoint (on-screen route build only).
• Delete a waypoint from the new route list (waypoint list route build only).
• Abandon the route build.
Undoing the last waypoint
To remove the last waypoint when you
are building a route on-screen:
D6498-3
USE WAYPOINT
LIST
BUILD NEW
ROUTE
ROUTES...
D8355-1
INSERT
WAYPOINT
Highlight required
waypoint Waypoint added to New Route.
Make Route
New Route Waypoints
Crag Rock
Blyth Bay
y y
Waypoints
Crag Rock
Blyth Bay
Sandy Bay
Make Route
Sandy Bay
New Route
01 Sandy Bay
D8357-1
USE WAYPOINT
LIST...
USE CURSOR.....
Chart to Make Route dialog
Make Route
New Route
01 Sandy Bay
02 Crag Rock
03 Rush Creek
Waypoints
Crag Rock
Blyth Bay
Sandy Bay
Make Route dialog to chart
Make Route
New Route
01 Sandy Bay
02 Crag Rock
03 Rush Creek
Waypoints
Crag Rock
Blyth Bay
Sandy Bay
D8352_1
UNDO WAYPOINT
81221_4.book Page 62 Tuesday, February 28, 2006 5:24 PM