Raymarine C Series - Manual (Page 101)

Chapter 4: Using the Chart 87
Showing or hiding waypoints/waypoint information
The system has various options to control the display of waypoints and waypoint
information. You can show or hide all your waypoints and their names or show or hide
waypoints by group or by symbol.
These options are particularly useful when you have placed a large number of
waypoints in a small area and rendered your chart difficult to interpret.
Note: The show/hide status of a waypoint is a local setting and will therefore only af-
fect the individual display on which you are working.
Show/hide by group/symbol
You can show or hide waypoints with a particular symbol or belonging to a specified
group:
1. Select to show/hide by waypoint group or symbol:
2. Change status to show or hide as required.
Show/hide waypoint name
You can show or hide the waypoint names from the screen:
Show/hide waypoint index
The order of waypoints within a route is indicated by the waypoint index. To show/hide
this index:
SHOW/HIDE
WAYPOINTS...
SHOW BY
PRESENTATION...
D6879_2
Toggle to symbol or
group
SYM
ON CHART
D8383_1
Select relevant group
Toggle to required
status
SHOW BY GROUP
Fishing SHOW
Diving HIDE
My Waypoints SHOW
SHOW
D6881_2
SHOW/HIDE
WAYPOINTS ...
WAYPOINT NAME
PRESENTATION…
ON
WAYPOINT INDEX
D6595-2
SHOW/HIDE
ROUTES…
ROUTES…
ON
81221_4.book Page 87 Tuesday, February 28, 2006 5:24 PM