Raymarine C Series - Manual (Page 24)

10 C-Series Display Reference Manual
Menus
0 Menus enable you to configure your system to your particular needs.
Whenever the MENU button is pressed, the Setup menu is displayed
containing a list of all the menus available for the active application
together with system wide menus e.g.
For details of application menus, please refer to the appropriate chapter. For all other
settings, please refer to
Chapter 12:System setup and customizing .
To access a menu:
1. Select the appropriate menu and setting:
2. To change the setting:
D6582-1
MENU
MENU
D7370_2
Menus for the active
application
External equipment/
instruments
System-wide menus
Setup
Radar Setup ...
GPS Status...
Compass Setup...
AIS Layer Status...
System Setup...
Alarm Setup...
Display Setup...
Databar Set...
Select Page Setup...
System Diagnostics...
Remove CF Card
D8500_1
Setup
Chart Setup...
GPS Status...
Compass Setup...
Cartography Setup...
MENU
Cartography Setup Menu
Chart Display Detailed
Chart Grid On
Chart Text On
Chart Boundaries ON
Spot Soundings ON
1. Highlight item, using:
Rotary control
2. Select item, using:
Trackpad (right)
Trackpad (up/down)
or
1. Highlight item, using:
Rotary control
2. Select item, using:
Trackpad (right)
Trackpad (up/down)
or
D8501_1
Cartography Setup Menu
Chart Display Detailed
Chart Grid On
Chart Text On
Chart Boundary ON
Spot Soundings ON
Depth Contour ALL
Nav. Marks ON
Highlight or change value to
new setting, using:
Safety Contour 66ft
OFF
7ft
10ft
20ft
33ft
66ft
16ft
OK
Trackpad (up/down)
or
Rotary control
81221_4.book Page 10 Tuesday, February 28, 2006 5:24 PM