Viewing target information, Displaying ais vectors, Displaying safety critical ais data – Raymarine C Series User Manual

Page 185

Advertising
background image

Chapter 11: Automatic Identification System (AIS)

171

Viewing target information

You can display information relating to individual AIS targets. When a target is
highlighted with the cursor. The soft keys change to allow you to select the following
options:
• AIS vectors.
• AIS safety critical data.
• AIS List.
• Full AIS data.

Displaying AIS vectors

A target is defined as active when it has the following data displayed graphically:
• A COG/SOG vector indicating the predicted distance that a target will travel within

a given period of time.

• A heading and direction of turn indicator.
To switch the AIS VECTOR option ON/OFF:

When a target is activated, its symbol is scaled according to the size of the vessel.

Note: The same target vector and safe zone settings apply to both Radar MARPA and
AIS targets.

Displaying safety critical AIS data

Safety critical target data i.e. COG, SOG, CPA and TCPA can be displayed in the tag
alongside each target. You can switch this data ON, OFF or display it automatically
(AUTO) when the cursor is over the target.
To switch the AIS DATA option to AUTO/ON/OFF:

D9051_1

Move cursor over
relevant target

AIS

AIS

AIS VECTOR

ON

D9052_1

Move cursor over
relevant target

Safety critical data
displayed

AIS DATA

AUTO

187

0

T

10.9kt

7.719nm

00h57m27s

AIS

81221_4.book Page 171 Tuesday, February 28, 2006 5:24 PM

Advertising