Ricoh 6513 - Manual (Page 142)

What is Image Overlay?
127
3
J
Make any adjustments you require.
Note
❒ Image Density, ⇒ P.28 “Adjusting Copy Image Density”.
❒ Color Mode, ⇒ P.30 “Selecting a Color Mode”.
❒ Original Type, ⇒ P.36 “Selecting the Original Image Type”.
❒ Image Adjustment, ⇒ P.142 “Image Adjustment”.
❒ Color Adjustment, ⇒ P.140 “Color Adjustment”.
❒ Color Balance Adjustment, ⇒ P.131 “Color Balance Adjustment”.
K
Press the [OK] key.
L
If you want to adjust the color creation, press the [Color Creation] key.
M
Make any adjustments you require.
Note
❒ Color Conversion, ⇒ P.94 “Color Conversion”.
❒ Color Erase, ⇒ P.96 “Color Erase”.
❒ Color Background, ⇒ P.97 “Color Background”.
N
Press the [OK] key.
O
Mark the first point on the background original with the editor pen.
P
Diagonally mark opposite corners of destination area on the background
original.
Q
Press the [Confirm Selection] key.
Note
❒ If you want to edit the background original, press the [Edit Background] key.
For details,
⇒ P.128 “Edit Background”.
❒ If you want to change the basic settings, press the [Basic Settings] key. For
details,
⇒ P.130 “Basic Settings”.
R
Press the
{{{{Start}}}} key.
Cat2-5_FM.book Page 127 Tuesday, February 20, 2001 9:27 AM