Ricoh 6513 - Manual (Page 67)

Copying
52
2
Energy Saver Mode
If you do not operate the machine for a certain period after copying or press the
{Energy Saver} key, the display goes out and the machine enters Energy Saver
mode. When you press the
{Energy Saver} key again, when the originals are load-
ed in the document feeder or when the platen cover or document feeder is
opened, the machine returns to the ready condition. In Energy Saver mode, the
machine uses less electricity.
A
Press the
{{{{Energy Saver}}}} key to enter the Energy Saver mode.
Note
❒ To exit this mode, press the {Energy Saver} key again.
Auto Off Mode
This machine automatically turns itself off 90 minutes after the last copy or print
job has finished. If you wish to make copies when the machine is in Auto Off
mode, press the operation switch.
Reference
For details about how to change the default interval, see “Auto Timer” on
⇒
P.213 “System settings”.
Cat2-5_FM.book Page 52 Tuesday, February 20, 2001 9:27 AM