Ricoh 6513 - Manual (Page 61)

Copying
46
2
E
If you select [Enter Size] in step
DDDD, enter the horizontal paper size with the
number keys, and then press the [#] key.
Note
❒ To change the value entered, press the [Clear] key and enter a new value.
F
Enter the vertical paper size with the number keys, and then press the [#]
key.
G
Press the [OK] key.
H
Adjust the paper guides to the paper size.
Note
❒ Make sure that the paper guides match the paper size. If the paper guides
are not adjusted to the paper size properly, paper might be skewed or a pa-
per misfeed might occur.
I
Insert the paper into the bypass tray.
J
Place your originals, and then press the
{{{{Start}}}} key.
Cat2-5_FM.book Page 46 Tuesday, February 20, 2001 9:27 AM