Ricoh 6513 - Manual (Page 80)

Reduce/Enlarge
65
2
A
Press the [Reduce/Enlarge] key.
B
Press the [Directional Mag.] key.
C
Press the [D. Size Mag.(mm)] key.
D
Enter the horizontal original size with the number keys, and then press the
[#]
key.
Note
❒ To change the value entered:
• If you have not pressed the [#] key yet, press the [Clear] key and enter a
new value.
• If you have already pressed the [#] key, select the specified key and en-
ter a value.
E
Enter the horizontal copy paper size with the number keys, and then press
the [#] key.
F
Enter the vertical original size with the number keys, and then press the [#]
key.
G
Enter the vertical copy paper size with the number keys, and then press the
[#]
key.
H
Place your originals, and then press the
{{{{Start}}}} key.
Cat2-5_FM.book Page 65 Tuesday, February 20, 2001 9:27 AM