Ricoh 6513 - Manual (Page 29)

Basics
14
1
Starting the Machine
A
Press the operation switch to make the On indicator go on.
Note
❒ If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
❒ During the warm-up period (about 8.5 minutes), you can use the Auto
Start function.
⇒ P.54 “Auto Start”.
When the machine is set for user codes
A
Enter your user code with the number keys. Then press the
{{{{#}}}} key.
Note
❒ To prevent others from making copies with your user code, press the {Clear
Modes
} key and the {Clear /Stop} key simultaneously after copying.
Reference
For details about how to set user codes,
⇒ P.217 “General Features”.
When the Energy Saver indicator is lit
The machine is in Energy Saver mode.
A
Press any key.
The machine will return to the ready condition.
Note
❒ The machine will also return to the ready condition when an original is set
in the document feeder, or when the platen cover or the document feeder
is opened.
Cat2-5_FM.book Page 14 Tuesday, February 20, 2001 9:27 AM