Ricoh 6513 - Manual (Page 206)

If You Cannot Make Copies as You Want
191
6
If you cannot correct the problem by taking the above actions, please contact
your service representative.
Letter parts and photo parts of
an original are not separated
correctly. An original has screen letters
or low density letters. Adjust the Text/Photo Sensi-
tivity to a “Text” level.
⇒
P.142 “Image Adjustment”.
An original has a high con-
trast photo. Adjust the Text/Photo Sensi-
tivity to a “Photo” level.
⇒
P.142 “Image Adjustment”.
An original has a photo hav-
ing a sequence of thin lines
with regular thin spaces.
Color parts of an original are
copied in black in Auto Color
Select mode. The original image contains
small or thin color parts. Adjust the A.C.S. Sensitivity
to a “Full color” level.
⇒ P.142
“Image Adjustment”.
Non-color parts of an original
are copied in color in Auto
Color Select mode. The machine might detect
some black and white screen
images (such as from newspa-
per) as a full color original. Select Black & White mode. ⇒
P.31 “Black & White copy
mode”.
Adjust the A.C.S. Sensitivity
to a “B&W” level.
⇒ P.142
“Image Adjustment”.
A copy image is blurred. The image density is too light. Adjust the image density. ⇒
P.28 “Adjusting Copy Image
Density”.
An improper kind of paper is
loaded. Load the right kind of paper
in the paper tray.
Note
❒ Copies might be blurred if
you copy onto rough
grain, coated, or damp pa-
per.
Toner is running out. Add toner. ⇒ P.196 “ D
Changing The Toner Cartridge”.
In Margin Adjustment mode,
parts of the original image are
not copied. The margin is set too wide. Set the narrow margin with
the user tools.
⇒ P.217 “Gener-
al Features”.
In Repeat Image mode, the
original image is not copied
repeatedly. An improper reproduction ra-
tio is selected. Select the proper reproduc-
tion ratio.
Problem Cause Action
Cat2-5_FM.book Page 191 Tuesday, February 20, 2001 9:27 AM