Ricoh 6513 - Manual (Page 69)

Copying
54
2
Auto Start
If you press the {Start} key during the warm-up period, the {Start} key will blink
and the machine will start copying after the warm-up period.
A
Set your copy settings during the warm-up period.
B
Press the
{{{{Start}}}} key.
Note
❒ To cancel Auto Start, press the {Clear/Stop} key.
Recall
This machine automatically stores the previous job settings. If you want to copy
with the same settings as the previous job, press the
{Recall} key. You can also
change the recalled job settings.
Note
❒ You cannot recall area editing and image overlay.
Cat2-5_FM.book Page 54 Tuesday, February 20, 2001 9:27 AM