Ricoh 6513 - Manual (Page 49)

Copying
34
2
C
Press the color on the image you wish to scan in with the editor pen.
Note
❒ Point to an area of color with a radius of at least 5 mm.
❒ To cancel the pointing, press the [Erase] key.
❒ For details about this display, ⇒ P.154 “Designate Area Display”.
D
Press the [OK] key.
Note
❒ The color you have chosen is scanned in.
E
Press the
{{{{Start}}}} key.
Twin Color Mode
Two methods are available:
❖ ❖ ❖ ❖ Color Copy
Reproduces black areas of the original in one selected color and areas in other
colors using the second selected color.
Note
❒ You can have colored areas copied in one of the following colors: Red,
Green, Blue, Yellow, Cyan, Magenta, Yellow Green, Orange, Marine Blue,
Beige, Pink, Purple and User Colors
❒ You can have black parts copied in one of the following colors: Red, Green,
Blue, Yellow, Cyan, Magenta, Yellow Green, Orange, Marine Blue, Beige,
Pink, Purple and User Colors
❖ ❖ ❖ ❖ Red & Black
Reproduces red areas of the original in red, and areas in other colors using
black.
Note
❒ You cannot change the color.
Cat2-5_FM.book Page 34 Tuesday, February 20, 2001 9:27 AM