Ricoh 6513 - Manual (Page 50)

Basic Procedure
35
2
Twin Color (Color Copy)
A
Press the [Twin Color] key.
B
Select the color you want to copy the color parts of the original in.
C
If you wish to copy black parts using a different color, press the [Change Black] key.
Note
❒ If you do not want to do this, go to step E.
D
Select the color you want to copy the black parts of the original in. Then
press the [OK] key.
E
Press the [OK] key.
F
Place your originals, and then press the
{{{{Start}}}} key.
Twin Color (Red & Black Copy)
Note
❒ If Color Sensitivity is set to wide, the machine recognizes orange or purple as
red. This adjustment affects Color Erase or Color Conversion. ⇒ P.142 “Image
Adjustment”.
A
Press the [Twin Color] key.
B
Press the [Red & Black Color] key, and then press the [OK] key.
Cat2-5_FM.book Page 35 Tuesday, February 20, 2001 9:27 AM