Ricoh 6513 - Manual (Page 238)

User Tools
223
7
Duplex/ADF/Sorter
Process Black When copying in full color, 4 colors (Yellow, Magenta, Cyan, and
Black) are used by default. You can change this so that only 3 colors
(Yellow, Magenta, and Cyan) are used.
Note
❒ Default: 4 colors
Inkjet Output Mode
Setting Specifies the type of image adjustment for Inkjet Output Mode:
• 1-emphasize yellow
• 2-emphasize red and yellow
• 3-emphasize red and blue
If you want to emphasis yellow, select 1.
If you want to emphasis red and yellow, select 2.
If you want to emphasis red and blue, select 3.
Note
❒ Default: 1
Menu Description
Duplex Tray Auto
Clear When making two-sided copies from one-sided originals, if the last
original is an odd page, the last copy will be automatically delivered
with the reverse side blank. You can cancel this setting.
Note
❒ Default: Off
SADF Auto Reset
Timer When you place one original at a time in the document feeder, the Auto
Feed
indicator lights for a selected time after an original is fed to show
that the document feeder is ready for another original. The time can be
set from 1 second to 99 seconds.
Note
❒ Default: 5 seconds
ADF Thin paper Use when changing the type of originals to be fed. Select this function
to avoid damaging thin originals (40 - 52g/m
2 , 11-14 lb) place in the
document feeder.
Note
❒ Default: Off
Menu Description
Cat2-5_FM.book Page 223 Tuesday, February 20, 2001 9:27 AM