Ricoh Aficio MP 161SPF - Manual (Page 55)

Interface Settings
47
2
❖ DNS Configuration
Make settings for the DNS server.
The default setting is Specify.
When you select [Specify], enter the DNS server IPv4 address as "xxx.xxx.xxx.xxx"("x"
indicates a number).
The default settings of DNS server 1-3 are 000.000.000.000.
❖ DDNS Configuration
Specify the DDNS settings.
The default setting is Active.
❖ Domain Name
Specify the domain name.
The default setting is Specify.
❖ WINS Configuration
Specify the WINS server settings.
The default setting is On.
If [On] is selected, enter WINS server IPv4 address as "xxx.xxx.xxx.xxx. ("x" in-
dicates a number)"
The default settings of WINS server 1-2 are 000.000.000.000.
If DHCP is in use, specify the [Scope ID].
Enter a [Scope ID] using up to 31 characters.
❖ Effective Protocol
Selects the protocol to use in the network.
The default setting for IPv4 is Active.
The default setting for IPv6 is Inactive.
The default setting for NetWare is Active.
The default setting for SMB is Active.
The default setting for AppleTalk is Active.
❖ NCP Delivery Protocol
Select the protocol for NCP delivery.
The default setting is TCP/IP Priority.
If you select "IPX Only" or "TCP/IP Only", you cannot switch the protocol
even if you cannot connect with it.
If "NetWare" in [Effective Protocol] is set to "Inactive", you can only use
TCP/IP.
❖ NW Frame Type
Select the frame type when you use NetWare.
The default setting is Auto Select.
❖ SMB Computer Name
Specify the SMB computer name.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Do not set a computer name starting with RNP and rnp.
Use uppercase letters for alphabets.