Regency Panorama P36D - Manual (Page 59)

FPI P36D-1 Zero Clearance Direct Vent Gas Fireplace 59
Note: The Nailing Strips can be adjusted, depending on the fac
material (as indicated in Diagram 7).
9) Optional
Install Optional 3-Panel Arch Door. (Refer to Install 3-Panel A
Door Instruction Sheet).
8) Attach Top and Side Support Frame
a) Ensure the Side Supports are aligned with the correspond
hole on the Top Support Frame, then secure with 1 screw.
b) Repeat step on the other side.
10) Change in Logo
Replace existing logo with Regency logo.
a) Mount Side Support Frame to unit as shown in Diagram 6, then
secure with 2 screws on each side.
7) Side Support Frame
b) Repeat step on the other side.
6) Install Top Support Frame
Slide in the Top Support Frame using the slots as a guide. Secure
and re-tighten the screws to the unit.
View of backside of Top Support Frame.
Cut-Outs
Diagram 7
1/2” Facing
Material
1” Facing
Material
Diagram 6
REGENCY ® OPTIONS